Collapse AllExpand All

Assign an IP Address to the IP DECT Stand

The IP DECT Stand requires an IP address on the LAN. Either your LAN must be configured with a DHCP server that automatically assigns an IP address to the stand, or you must manually configure the stand with a static IP address and subnet mask.

To manually configure the stand with a static IP address and subnet mask, follow these steps:

  1. From idle mode, press the OK key, select Settings, and then press OK.
  2. Select Network settings and press OK.
  3. When prompted for a PIN, enter the PIN (Default 0000), and then press OK.

    When the IP address menu item is shown in red, then the stand is configured to obtain an IP address dynamically from a DHCP server.

  4. Select IP Mode and press OK.
  5. Select Static and press OK.
  6. Press Back, select IP address, and then press OK.
  7. Press Erase to delete the current entry (0.0.0.0).
  8. Enter a static IP address for the stand. To enter periods in the address, press Options and then press Insert symbols.
  9. Press OK.

    Save? appears in the display.

  10. Press Yes.
  11. Select Subnet mask and press OK.
  12. Enter a Subnet mask.
  13. Press OK.

    Save? appears in the display.

  14. Press Yes.
  15. Select Default Gateway
  16. Enter default gateway IP
  17. Press OK.

    Save? appears in the display.

  18. Press Yes
  19. Press Back.

    You are prompted to reset the gateway (stand).

  20. Press Yes.
  21. Press Back repeatedly to return to the main display.

    After several seconds, Searching for Gateway appears in the handset main display. It takes approximately 30 seconds for the stand to reset.

    After the stand resets, it is configured with the static IP address and subnet mask. Configure SIP domain appears in the handset main display.

© Copyright 2021
 		Document Version: Final 1.0
 		Send Feedback